CV Brake Pads Laser Printing Machine is used for printing all kinds of logo and words on the surface of finished brake pads, pc brake shoe linings, cv Brake Linings, anti-noise shims as well as backing plates. It’s clean, safe and fast, and can be connected into the automatic production line with other machines. Technical…
CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Motorcycle Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
Passenger Car Brake Shoe Lining Inner Arc Grinder is used for grinding the inner surface of brake shoe lining. It applies rubber wheel to hold the Brake Linings and convoy them in and out. It uses emery grinding wheels to grind the surface with parallel grinding lines. Technical Parameters： 1. Size of Emery Grinding Wheels: φ140 X…
Brake Pads Friction Materials Phenolic Resin is used as the main adhesive in the friction industry, without its binding effect, we cannot produce a qualified friction products. Resin doubtless is the core friction material ingredient, its performance plays an important role on the brake pads and clutches manufacture. In the whole combination of friction materials,…
Motorcycle Finished Brake Shoe Tunnel Type Oven is used to combined the brake shoe and friction linings by heating in the hot oven, Technical Parameters： Total Power: 90 KW Machine Size: 21000mm*1150mm*1300mm Heating Pipe: Stainless Heating Pipe Transfer Type: Mesh Conveyor Wind Motor: 0.37KW*5 Temperature: Automatic PLC Control Production Capacity: 3000 sets/8 hours Click To…
Brake Pad Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get a…
Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the temperature…
CV Brake Lining Inner Arc Grinding Machine is used for grinding the inner surface of CV brake shoe lining. Technical Parameters： 1. Size: 3800 x 960 x 1350mm 2. Weight: 2450kg 3. Production Capacity: 2500-3200pcs (8 hours) 4. Max Chamferring Height: 30 degree*20 mm 5. Semi-diameter adjustable range: (R140 – R170) – (R170 – R215) 6. Main Motor Power: 7.5kw 7. Chamfer Motor Power: 2.2kw 8. Conveyor: 1.5kw Click To See More Brake…