Back Plates Automatic Blanking Punch Machine is an automatic punch machine for the blanking of brake pad back plates, it is an automatic punch machine with feeding. Technical Specifications: The max. size of steel sheet: 3000mm x1500mm Maximum moving speed: 500mm/s The max. clamping plate thickness: 10mm Movement accuracy: ≤±0.1mm Working table size: 3000X2450mm Workbench…
Car Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters： – Working Room Size: Width ≤500mm – Application Range: Metal or…
Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines
Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
CV Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Automatic Brake Lining Hole Drilling Machine is used for drilling rivets holes of CV brake lining automatic.It realizes automatic feeding, automatic clamping, automatic indexing, automatic rotation, automatic drilling, automatic cutting, and automatic stacking. One worker can operate 3 to 4 machines. Technical Parameters： Click To See More Brake Lining Machines
Motorcycle Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared…
Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
CV Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Shoes Machines