Car Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive…
Motorcycle Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Brake Pads Friction Materials-Nitrile Butadiene Rubber(NBR) also known as Butadiene Acrylonitrile rubber, is a widely used friction material adhesive, with good cold resistance, abrasion resistance, oil resistance, and elasticity. Rubber powder works not only as the binder, but also as an inorganic filler in the friction materials. It can be evenly mixed with resin to…
Brake Pad Back Plates Hook Drawing Machine is an machines to process the hooks on the brake pad back plates, to increase the shear force in Brake Pads. Technical Specifications: No. Item Parameters 1 Length Range of Back Plates ≤450mm 2 Applicable Back Plates Length 100-400mm 3 Applicable Back Plates Width 60-180mm 4 Applicable Back…
Car Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings, and it is highly working conditions and efficiency. Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide…
CV Brake Lining Inner Arc&Chamfering Combined Grinder is a machine to work on the inner arc surface and chamferrings on the CV Brake Linings. Technical Parameters： Products Range:R170mm-R205MM;Width 150-230mm Total Power:18kw Weight:3100kg Production Capacity:2800-3400pcs (8 hours) Machine Size: 3650mm*1250mm*1700mm
Brake Pads Friction Materials-Mineral Fiber|Mineral Wool Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus of…
The Automatic Brake Pads Friction Mixes Weighing Machine is an advanced and highly efficient device specifically designed for the brake pads manufacturing industry. Its primary function is to accurately weigh the friction mixture and then divide it into small cups in strict accordance with the set weight of the input raw materials for brake pads….
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…