No products were found matching your selection.
Other Related Products
-
Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
-
Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
-
Brake Pads Back Plates Gluing Painting Room is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Configuration and Technical Parameters: Painting room size: 1900×2860×2130mm Chain center distance: 650mm Operating height: 800±50mm Painting System: Spray gun: Japan Iwata spray gun WA200-1.2 caliber Working…
-
Brake Pad Back Plates Production Machine is a punch machine for produce brake pad back plates with higher prdocution efficiency and stable working. Technical Specifications: Sliding Block Pressure: 1100KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole…
-
-
-
Brake Pads Friction Materials-Flake Graphite/Natural Graphite Powder is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy…
-
Brake Pad Back Plate Assembled Punch Machine is an automatic puch machine for the process of blanking, holes punch, side punch, pins punch and fine blanking. Technical Specifications: No. Item Parameters 1 Master Cylinder Force 5000 KN 2 Mold Cylinder Force 1000 KN*2 3 Max Working Force 25 Mpa 4 Main Cylinder Max. Stroke 300…
-
CV Brake Lining Inner Arc&Chamfering Combined Grinder is a machine to work on the inner arc surface and chamferrings on the CV Brake Linings. Technical Parameters： Products Range:R170mm-R205MM;Width 150-230mm Total Power:18kw Weight:3100kg Production Capacity:2800-3400pcs (8 hours) Machine Size: 3650mm*1250mm*1700mm
