No products were found matching your selection.
Other Related Products
-

Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
-

Brake Pad Backing Plates Glue Spraying Booth is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Main Configuration and Technical Parameters: Painting room size: 2600×1840×1910mm Chain center distance: 650mm Operating height: 800±50mm Glue supply method: Pneumatic agitator prevents glue from settling, peristaltic…
-

PRODUCTION DESCRIPTION: Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
-

Brake Pads Backing Plates Ultrasonic Clean Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification: – Size:L8565*W2120*H1290mm – Load and Lay Off Material Platform (Length/Width):Each With 500×440mm – Cleaning Tank Inner Size:L2300×W440×H200mm – Spray Rinse Inner Size:L800×W440×H150mm – Compressed Air Cutting Water Inner Size:L600×W440×H150mm – Hot Oven Inner Size:L2998×W440×H150mm – Conveyor Belt Width:400mm – Liquid Storage Tank:L700*2…
-

Motorcycle Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
-

Car Brake Pads Automatic Packing Line is used for packing finished brake pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters: – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
-

Brake Pads Friction Material- Wollastonite is a widely used friction material reinforced fiber, which is gradually replace asbestos as a main reinforced fiber during the friction material production, such as Brake Linings, brake pads, and other brake system friction material. GRANULARITY(SIEVE ANALYSIS,PARTICLE SIZE) Length of Fiber (lf): 0.384mm Diameter of Fiber (df): 20μm Length to Diameter Ratio…
-

Automatic CV Brake Shoe Riveting Machine is designed for riveting the CV Brake Linings onto the steel CV brake shoe backs. It is a high degree of automation machine, with simple operation, only one ordinary operator can complete the work. Full digital control, full monitoring of riveting stroke and pressure, complete preservation of production data….
-

Brake Pads Friction Wear Test Machine provides precise data on frictional material performance and wear characteristics in accordance with Chinese Standard GB5763-98; GB5764-98 and Japanese Standard JIS D4411-1993. Technical Parameters: – Friction plate:Material HT250; Hardness:HB180-220; – Rotating speed: 480 ± 10 r/min; – Driving motor: 7.5 kw, 970 r/min; – Sample Size: 25 x 25mm; Thickness: 5 – 7…