CV Brake Lining Warning Line Grinding Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines https://www.youtube.com/watch?v=HG6nOJ_P5UM
Light Truck Brake Lining Drilling Machine is used for drilling rivets holes of light truck brake lining automatic. It realizes automatic feeding, automatic clamping, automatic indexing, automatic rotation, automatic drilling, automatic cutting, and automatic stacking with a digital control system. Technical Parameters: Light Truck Brake Linings Ranges: – Inner Radius: Min. 140mm Max. 203mm –…
Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush
Motorcycle Brake Pads Slot Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880 rev /…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept： This automatic equipment is divided into 4 blocks: Block…
Motorcycle Brake Shoe Linings Combined Grinding Machine is used for process the inner arc, out arc, side chamfering and cutting of brake shoe linings Technical Parameters： Out Arc Grinding Motor: 5 KW Inner Arc Grinding Motor: 5 KW Chamfering Motor: 2 KW Cutting Motor: 3 KW Machine Size: 4400mm*1200mm*1500mm Working Capacity: 30000 pcs/8 hours Click…
Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled. –…
Brake Pad Back Plates Punch Machine is a machine for brake pad back plates production, it can be used for punching holes, pins, sides and fine blanking. Technical Specifications: Sliding Block Pressure: 1600KN Sliding Block Stroke:200mm Stoke Numbers:45 times/min (fixed);30-45 times/min (alterable) Die Height:400mm Die Height Adjustment:100mm Dimension From Slider Centreline to Machine:400mm Slider Base…
Brake Pads Friction Materials-Mineral Fiber|Mineral Wool Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus of…