Brake Pads Friction Materials-Silica Powder, is also purified from siliCarenite or sand stone. It is widely used as an inorganic friction raw material filler. Silica powder improves the friction products’ wear resistance, as well as the friction coefficient. Silica is a high Mohs scale of hardness filler, it need to be grinded into very small…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
CV Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
CV Brake Lining Hot Press Machine is an automatic press machine combined with the automatic materials weighting and feeding machine, and an automatic pick-up robot. It not only can increase the working efficient, and also save the labor cost in production. lTechnical Parameters： Click To See More Brake Lining Machines
Brake Lining Holes Drilling and Warning Indicator Cuts Machines is used to process the holes and warnning cuts on different sizes of Brake Linings. Processing Range: R180mm-R205mm Width Range: 150mm-230mm Holes Shape: Adjustable Motor: 7 KW Feeding: Manual or Automatic Production Capacity: 1300pcs-1800pcs/8 hours Dust Collector: φ114mm*1pcs;φ50mm*2pcs Machine Size: 1350mm*1250mm*1900mm Machine Weight: 1300KGS Click To…
Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
Brake Pad Back Plate Assembled Punch Machine is an automatic puch machine for the process of blanking, holes punch, side punch, pins punch and fine blanking. Technical Specifications: No. Item Parameters 1 Master Cylinder Force 5000 KN 2 Mold Cylinder Force 1000 KN*2 3 Max Working Force 25 Mpa 4 Main Cylinder Max. Stroke 300…
Brake Pad Back Plates Flatting Machine is a hydraulic press machine to flatting the Brake Pads Back Plates, to ensure a qualified flatness. Technical Specifications: Height to the Opening Hole: 550mm Assembly Size: 600mm(left to right)x600mm(front to rear) Working Length: 350mm Motor/pump: 4KW (6 electrodes), 25L Height of the Working Table: 800mm Down-link Speed: 350mm/s…