Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
The Car Brake Pads Electrostatic Powder Coating Line, an essential component of Brake Pads Machinery, represents a cutting – edge solution that revolutionizes the powder coating process for brake pads. This advanced line, also known as one of the Brake Pads Powder Coating Equipments, Brake Pads Powder Coating Machinery, or Brake Pads Powder Coating Machines,…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept： This automatic equipment is divided into 4 blocks: Block…
Brake Pad Back Plates Punch Machine is a machine for brake pad back plates production, it can be used for punching holes, pins, sides and fine blanking. Technical Specifications: Sliding Block Pressure: 1600KN Sliding Block Stroke:200mm Stoke Numbers:45 times/min (fixed);30-45 times/min (alterable) Die Height:400mm Die Height Adjustment:100mm Dimension From Slider Centreline to Machine:400mm Slider Base…
Automatic PC Brake Shoe Lining Grinding Line for processing the passenger car brake shoe lining inner arc grinding, outer arc grinding and side edge chamferring, and can add long lining cutting procedure accordingly (if brake shoe lining pressed into a long block). The production line adopts PLC programmable control system, and the action and process…
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Motorcycle Finished Brake Shoe Tunnel Type Oven is used to combined the brake shoe and friction linings by heating in the hot oven, Technical Parameters： Total Power: 90 KW Machine Size: 21000mm*1150mm*1300mm Heating Pipe: Stainless Heating Pipe Transfer Type: Mesh Conveyor Wind Motor: 0.37KW*5 Temperature: Automatic PLC Control Production Capacity: 3000 sets/8 hours Click To…
CV Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Car Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…