Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…
Car Vertical Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system,…
Car Brake Pads Compression Test Machine is designed to check the dimension change of disc brake pads under the influence of heat and pressure, in accordance with world recognized standard ISO6310-1981-07-01, ISO6310-2001 as well as ISO6313-1980-06-01. Technical Parameters： – hydraulic cylinder stroke: 60mm – hydraulic cylinder piston diameter: 90mm – displacement sensor travel: 2mm – the measurement accuracy:…
Brake Pads Back Plates Assembling Automatic Production Line is an full automatic production line for brake pads back plates with a complete production process. Technical Parameters：
CV Brake Pads Brake-In Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x…
Motorcycle Brake Lining Cutting Machine is a special equipment to cut brake shoe linings into small pieces to meet different dimension requirements. Specification： 1. Blade Diameter 150mm 2. Total: 13 blades 3. Diameter: R85-120mm 4. Motor power: 4KW 5. Adjustable lining cutting width Click To See More Motorcycle Brake Shoes Machines
CV Brake Pad Back Plates Punch Machine is a punch machine for producing the CV brake pad back plates, can be connected with mechanical robots. Technical Specifications: Sliding Block Pressure: 5000KN Sliding Block Stroke:200mm Stoke Numbers:22 times/min (fixed) Die Height:500mm Die Height Adjustment:130mm Dimension From Slider Centreline to Machine:450mm Slider Base Size:820mm (L/R)*500mm(F/B) Shank Hole…