Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
Car Brake Pad Scorching Machine is used for friction surface high temperature scorching treatment, to carbonize the surface of OE quality Brake Pads. It consists with scorch oven and cooling zone with one line. It is continuous operation type and no delaying time. Brake pad moves on electrical heated plate without pressure. Scorching time and…
Motorcycle Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pad Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get a…
Car Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
CV Brake Lining Side Chamferring Machine is used for processing both edge chamferring and grinding of CV Brake Linings on one side. Technical Parameters： Machine size:2380 x 1000 x 1100 mm Production Capacity:2800 – 3500 pcs / shift Chamferring size: Max. 50 mm. Click To See More Brake Lining Machines
Automatic PC Brake Shoe Lining Grinding Line for processing the passenger car brake shoe lining inner arc grinding, outer arc grinding and side edge chamferring, and can add long lining cutting procedure accordingly (if brake shoe lining pressed into a long block). The production line adopts PLC programmable control system, and the action and process…
CV Brake Lining Inner Arc Grinding Machine is used for grinding the inner surface of CV brake shoe lining. Technical Parameters： 1. Size: 3800 x 960 x 1350mm 2. Weight: 2450kg 3. Production Capacity: 2500-3200pcs (8 hours) 4. Max Chamferring Height: 30 degree*20 mm 5. Semi-diameter adjustable range: (R140 – R170) – (R170 – R215) 6. Main Motor Power: 7.5kw 7. Chamfer Motor Power: 2.2kw 8. Conveyor: 1.5kw Click To See More Brake…