Car Brake Shoes Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
CV Brake Lining Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Shoes Machines
Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Fiber Steel Wool is a friction raw material filler, can be used in all kinds of friction materials. It can provide the friction products excellent stable performance over a wide temperature range, with low wear rate and good heat dissipation. Chopped steel fiber is made from high quality low carbon…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
CV Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Car Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
CV Brake Lining Side Painting Machine is used to painting different colors on the both sides of Brake Linings with automatically. Technical Parameters: CV Brake lining size range. -Inner arc radius: R142-R245 Width. -Width: ≤254mm -CV Brake Linings Thickness: ≤30mm Spray Gun: 2 Pcs Working Efficiency:1000-1200pcs/hour Size: 1340x1060x1420mm Weight: 200KG Click To See More Brake Lining Machines