Car Brake Pads Sand Blasting Machine is used for cleaning the out surface of a finished brake pad by silicon sands to present a clean and smooth appearance before powder coating, which is equipped with an Air Compressor to blow out silicon sands. Technical Parameters： – Working Room Size: Width ≤500mm – Application Range: Metal or…
BL-EHP series positive molding technique vulcanizing press machines are the most popular type press machines used for making both OE passenger car and commercial vehicle Brake Pads. There 8 cylinder type and 4 cylinder type, designed according to different size of brake pads, and required curing pressure for formulation. All the press machine can be…
Brake Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings Technical Parameters： Click To See More Brake Lining Machines
CV Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
Motorcycle Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared…
Car Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr:…
CV Brake Pad Back Plates Punch Machine is a punch machine for producing the CV brake pad back plates, can be connected with mechanical robots. Technical Specifications: Sliding Block Pressure: 5000KN Sliding Block Stroke:200mm Stoke Numbers:22 times/min (fixed) Die Height:500mm Die Height Adjustment:130mm Dimension From Slider Centreline to Machine:450mm Slider Base Size:820mm (L/R)*500mm(F/B) Shank Hole…
Motorcycle Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Car Brake Shoes Tensioning Machine is used for fixing the lining and brake shoe back plates. Technical Parameters： 1. Hoof working diameter range:170~340mm (customized according customer’s requirement) 2. Work pressure:1000kg/10000N 3. Size: 800*500*850mm 4. Weight: 500Kgs Click To See More Car Brake Shoes Machines