Brake Lining Hot Press Machine
Brake Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings Technical Parameters： Click To See More Brake Lining Machines
No products were found matching your selection.
Other Related Products
-
-
Motorcycle Brake Pads Friction Mixes Weighting Machine
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
-
Brake Pad Back Plates Production Machine 1100KN
Brake Pad Back Plates Production Machine is a punch machine for produce brake pad back plates with higher prdocution efficiency and stable working. Technical Specifications: Sliding Block Pressure: 1100KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole…
-
Automatic Brake Pad Press Machine Group Set with Weighting System
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: One-layer or double-layer friction mixes weighing Mixes flattening(pre-pressingif with…
-
Car Brake Shoes Hot Curing Oven
Car Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
-
Motorcycle Brake Shoe&Brake Lining Gluing Machine
Motorcycle Brake Shoe&Brake Lining Gluing Machine is to spray the glue on both the brake shoe aluminum parts and the friction brake lining. Technical Parameters： Total Power: 30 KW Machine Size: 9000mm*1400mm*1000mm Heating Pipe: Infrared Transfer Type: Mesh Conveyor Wind Motor: 0.75KW*3 Temperature: Automatic PLC Control Glue Tank: 40 L Production Capacity: 30000-40000 Pcs/8 hours…
-
Brake Pad Steel Back Plates Machine 4000KN
Brake Pad Steel Back Plates Machine 4000KN is a punch machine for blanking process of Brake Pads Backing Plates, with stable working performances! Technical Specifications: Sliding Block Pressure: 4000KN Sliding Block Stroke:200mm Stoke Numbers:25 times/min Die Height: 600mm Die Height Adjustment:120mm Dimension From Slider Centreline to Machine:1050mm Slider Base Size:1050mm (L/R)*1050mm(F/B) Shank Hole Size:80mm(diameter);90mm(depth) Work…
-
Brake Lining Side Chamferring Machine
Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
-
Brake Pad Back Plates Punch Machine 1600KN
Brake Pad Back Plates Punch Machine is a machine for brake pad back plates production, it can be used for punching holes, pins, sides and fine blanking. Technical Specifications: Sliding Block Pressure: 1600KN Sliding Block Stroke:200mm Stoke Numbers:45 times/min (fixed);30-45 times/min (alterable) Die Height:400mm Die Height Adjustment:100mm Dimension From Slider Centreline to Machine:400mm Slider Base…