No products were found matching your selection.
Other Related Products
-
Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…
-
CV Brake Lining Laser Printing Machine is used for printing all kinds of logo and words on the surface of finished Brake Pads, pc brake shoe linings, cv Brake Linings, anti-noise shims as well as backing plates. It’s clean, safe and fast, and can be connected into the automatic production line with other machines. Technical…
-
Car Brake Pads Riveting Machine is used for riveting some kits on the finished brake pads, such as wear indicator plate, retaining clips after code printing before package. Technical Parameters： Work Pressure: 5-10MPa Effective Travel:100mm Height:210mm Riveting Span:220mm Power: 1.1KW/380V Dimension: 640×520×1030 mm Weight: 140Kg Click To See More Brake Pad Machines
-
Vertical Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
-
Brake Pads Cleanning Machine Before Powder Coating is used to clean the back plate side of brake pads before powder coating, to guarantee a smooth coating performance. Technical Parameters Production Capacity: About 3000 pcs/hour Speed: 9 meters/minute Brush: 3 Pcs Brush Motor: 1.1kw*3 Transport Motor: 0.75kw Dust Collect: Seperately for single brush
-
Brake Pads Plough-Chopper Friction Materials Mixer applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
-
Brake Pads Friction Materials- Rock Wool Fiber Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus…
-
CV Brake Pads Strips Gluing Machine is designed to coat the brake-in strips on the friction surface. Coating different pattern of the glue strips shall change the pattern molds on this machine. Technical Parameters： Size of the machine(L x W x H): 650mm x 800mm x 1600mm Working Table Size(L x W): 280mm x 350mm…
-
CV Brake Lining Inner Arc&Chamfering Combined Grinder is a machine to work on the inner arc surface and chamferrings on the CV Brake Linings. Technical Parameters： Products Range:R170mm-R205MM;Width 150-230mm Total Power:18kw Weight:3100kg Production Capacity:2800-3400pcs (8 hours) Machine Size: 3650mm*1250mm*1700mm
