Car Brake Pads Combined Grinding Machine combines procedures of slotting, coarse grinding, fine grinding, and dust cleaning at one machine with high efficiency. Technical Parameters： Grinding Unit Spec. Rough Surface Grinding Unit: 1 Set (Vertical spindle 11.25 Kw) Slot Grinding Unit: 1 Set (Horizontal spindle 7.5 Kw) Fine Surface Grinding Unit: 1 Set (Vertical spindle…
Car Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled. –…
Combined Brake Shoes Lining Grinding Machine applies overlap-type frame, it can realize automatic load in and load out. it can process sides chamfering, inner arc grinding, and dust brushing. It solves the problems of weak synchronization of old technology grinder. It’s convenient to adjust the grinding motor, and easy to adjust the “R” size accuracy. The newly position…
Introduction: Brake Pads Backing Plates Cleanning Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification Size:L8565mm*W2120*H1290mm Load and Lay Off Material Platform (Length/Width):Each With 500×440mm Cleaning Tank Size:L2300×W440×H200mm Spray Rinse Size:L800×W440×H150mm Compressed Air Cutting Water Inner Size:L600×W440×H150mm Hot Oven Size:L2998×W440×H150mm Conveyor Belt Width:400mm Liquid Storage Tank:L700*2 Voltage:220V±15`HZ;380V±15% 50HZ Ultrasonic…
CV Brake Lining Inner Arc Grinding Machine is used for grinding the inner surface of CV brake shoe lining. Technical Parameters： 1. Size: 3800 x 960 x 1350mm 2. Weight: 2450kg 3. Production Capacity: 2500-3200pcs (8 hours) 4. Max Chamferring Height: 30 degree*20 mm 5. Semi-diameter adjustable range: (R140 – R170) – (R170 – R215) 6. Main Motor Power: 7.5kw 7. Chamfer Motor Power: 2.2kw 8. Conveyor: 1.5kw Click To See More Brake…
Brake Lining Side Chamferring Machine is used for processing the edge chamferring of CV Brake Linings on dual sides. Technical Parameters： Machine size:2000×100×1500 mm Production Capacity:2800 – 3500 pcs / shift Angle of Chamfer wheel: 0 to 60° Chamferring size: 5 – 40 mm. Click To See More Brake Lining Machines
Car Brake Pads Slot and Chamfering Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880…
Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More CV Brake Pad Machines