Automatic PC Brake Shoe Lining Grinding Line for processing the passenger car brake shoe lining inner arc grinding, outer arc grinding and side edge chamferring, and can add long lining cutting procedure accordingly (if brake shoe lining pressed into a long block). The production line adopts PLC programmable control system, and the action and process…
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Brake Pads Backing Plates Ultrasonic Clean Machine is used for steel backing plate surface degreasing with ultrasonic before gluing. Specification: – Size:L8565*W2120*H1290mm – Load and Lay Off Material Platform (Length/Width):Each With 500×440mm – Cleaning Tank Inner Size:L2300×W440×H200mm – Spray Rinse Inner Size:L800×W440×H150mm – Compressed Air Cutting Water Inner Size:L600×W440×H150mm – Hot Oven Inner Size:L2998×W440×H150mm – Conveyor Belt Width:400mm – Liquid Storage Tank:L700*2…
Brake Pads Friction Materials-Flake Graphite/Natural Graphite Powder is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy…
Car Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
CV Brake Lining Warning Sensor Cutting Grinder is a machien to process the warning sensor cuts on the CV Brake Linings with high working performance. Technical Parameters： Machine size:1350MM*1050MM*1750MM Production Capacity:5000-5500pcs / 8hours Processing Range: R180-R205 Width: 150-230mm Total Power: 2.2kw Machine Weight: 800kg
Car Brake Shoe Lining Inner Arc Grinding Machine for the internal radius of brake cutting linings, which can process an accurate size and qualified surface on the inner surface of cutting linings, to provide a good combination performance of the Brake Linings. Technical Parameters： Linings Process Range: Diameter＞60mm Feeding Speed: 1.7m/minute Main Axle Power: 3KW/2880…
Motorcycle Brake Pad Scorching Machine is used for friction surface high temperature scorching treatment, to carbonize the surface of OE quality Brake Pads. It consists with scorch oven and cooling with one line.It is continuous operation type and no delaying time. Brake pad moves on electrical heated plate without pressure. And also, scorching time and temperature…
Brake Lining Holes Drilling and Warning Indicator Cuts Machines is used to process the holes and warnning cuts on different sizes of Brake Linings. Processing Range: R180mm-R205mm Width Range: 150mm-230mm Holes Shape: Adjustable Motor: 7 KW Feeding: Manual or Automatic Production Capacity: 1300pcs-1800pcs/8 hours Dust Collector: φ114mm*1pcs;φ50mm*2pcs Machine Size: 1350mm*1250mm*1900mm Machine Weight: 1300KGS Click To…