No products were found matching your selection.
Other Related Products
-
Brake Pads Back Plates Production Line is an automatic production machine for punch the brake pad back plates. Technical Specifications: Sliding Block Pressure: 1250KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole Size:70mm(diameter);90mm(depth) Work Table Size:1100mm (L/R)*680mm(F/B)…
-
CV Brake Linings Automatic Packing Line is used for packing finished Brake Pads, brake linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
-
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
-
Brake Pads Friction Materials-Calcium Sulfate Whisker(CSW) is a white cotton-like material with perfect structure, regular morphology, and stable dimension. It is a novel microfiber with the length to diameter ratio of 40~300. It is the latest generation of reinforcing material for high performance composite with lower toxicity. It can be widely used to fabricate light…
-
-
Car Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
-
Brake Pads Friction Materials Phenolic Resin is used as the main adhesive in the friction industry, without its binding effect, we cannot produce a qualified friction products. Resin doubtless is the core friction material ingredient, its performance plays an important role on the brake pads and clutches manufacture. In the whole combination of friction materials,…
-
-
Motorcycle Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
