Car Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Automatic Brake Pad Press Machine Group Set with Weighting System is a combination of a weighing system, 1 to 6 units of hot pressers, automatic manipulators on travelling rack, and other accessories. It is mainly responsible for the following 6 procedures during the whole production process: Designing Concept： This automatic equipment is divided into 4 blocks: Block…
CV Brake Shoes Steel Punching Machine is used for blanking rolling plate,punching holes for rolling plate and tendon plate for Commercial Vehicles Brake Shoe. Specification: 1. Nominal force：400 T 2. Table size：L-R:1250mm,F-B:1250mm 3. Outline:3500mm 4. Dimension:6000mm 5. Main Motor:22Kw Click To See More Brake Shoes Machines
Car Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive…
Brake Pad Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get a…
Car Brake Shoes Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Automatic CV Brake Shoe Riveting Machine is designed for riveting the CV Brake Linings onto the steel CV brake shoe backs. It is a high degree of automation machine, with simple operation, only one ordinary operator can complete the work. Full digital control, full monitoring of riveting stroke and pressure, complete preservation of production data….
Car Brake Pads Krauss Test Machine is designed to test the wear performance of brake friction materials for automotive disc brake pads / drum Brake Shoes and assembly, in accordance with world recognized standard PVW-3211, PVW-3212, ECE R90. Machine is with constant torque test function and constant pressure test function Technical Parameters： Supply Power: 380V,…