Assembled Passenger Car Brake Shoe Outer Arc Grinder is used for grinding the assembled passenger car and light truck brake shoe after bonding together. Technical Parameters： 1. Emery wheel diameter: 240 mm 2. Emery wheel height: 50 – 80m 3. Radius of brake shoe assembly: 85 – 160 mm (customized according customer’s requirement) 4. Diameter of Dusting hole: 118mm
Car Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Linings Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to the…
Automatic CV Brake Shoe Riveting Machine is designed for riveting the CV Brake Linings onto the steel CV brake shoe backs. It is a high degree of automation machine, with simple operation, only one ordinary operator can complete the work. Full digital control, full monitoring of riveting stroke and pressure, complete preservation of production data….
Automatic Brake Pads Friction Mixes Weighing Machine is used to weigh the friction mixture and divide then into small cups according the set weight of input raw materials for brake pads. Material tank can be divided into two bins, and weigh two different mixture at the same time. Technical Parameters： BL-PC46–FMW(for pc brake pads) Working…
Automatic CV Brake Shoe Lining Grinding Line is an assembled production for CV Brake Linings, including arc grinding, holes driling, cleaning. Technical Parameters： CV Brake Lining Combined Grinder vCV Brake Lining CNC Hole Drilling Machine (2-drum working station) CV Brake Lining Out Arc Grinder (PLC Controlled)
Motorcycle Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Motorcycle Brake Pad Machines
Brake Pads Backing Plates Deburring Machine is used to clean the burrs on sides of Brake Pads Back Plates after the punching process. Technical Parameters： Size of the machine(L x W x H): 1900mm x 800mm x 1050mm Size of backing plate: Max. 30mm x 350mm Production capacity: 16000 pcs/ hour Working Table: Speed: 0-…
Brake Pad Back Plates Production Machine is a punch machine for produce brake pad back plates with higher prdocution efficiency and stable working. Technical Specifications: Sliding Block Pressure: 1100KN Sliding Block Stroke:180mm Stoke Numbers:50 times/min (fixed);35-50 times/min (alterable) Die Height:350mm Die Height Adjustment:90mm Dimension From Slider Centreline to Machine:350mm Slider Base Size:620mm (L/R)*520mm(F/B) Shank Hole…