Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
Brake Lining Resin Pulverizer Machine is designed for grinding the resin into production level granule size, raw material is fed into the grinding chamber via hopper by spiral feeder, cut into powder particles by high speed cutters, then moved into separator by wind generated by motor, this method is called negative pressure sucking method. No…
Brake Pads Backing Plates Deburring Machine is used to clean the burrs on sides of Brake Pads Back Plates after the punching process. Technical Parameters： Size of the machine(L x W x H): 1900mm x 800mm x 1050mm Size of backing plate: Max. 30mm x 350mm Production capacity: 16000 pcs/ hour Working Table: Speed: 0-…
Automatic CV Brake Shoe Lining Grinding Line is an assembled production for CV Brake Linings, including arc grinding, holes driling, cleaning. Technical Parameters： CV Brake Lining Combined Grinder vCV Brake Lining CNC Hole Drilling Machine (2-drum working station) CV Brake Lining Out Arc Grinder (PLC Controlled)
Brake Pads Friction Material Brass Fiber is a very common metal friction material filler, its good heat transfer coefficient contributes to transfer the heat generated from frictional touch face to in-part of the friction products, thus to control of the temperature of the brake components. The chemical composition and micro-structure of the fiber make Brass…
Car Brake Shoe Lining Out Arc Grinding Machine is used for grinding the out arc surface of car Brake Shoes. The complete working station is protective covered. With door open and close protective device. Grinding Process: -Open the door -Put the linings on the mold -Close the door -Start the machine -Finish the grinding. -Take…
Car Brake Pads Slanted Slot and Chamfer Machine is used to process the special slant slot and chamfering on brake pads with automatcally. Technical Parameters： Size of the machine(L x W x H): 2200mm x 1200mm x 1500mm Weight: 1.5 Ton Productivity: 600 pcs / hour Slotting: 2 x 4KW motors (2900/min), Ø250 diamond cutter…
PRODUCTION DESCRIPTION： Brake Pads Friction Material-Flake Graphite is probably the most familiar of the natural graphite materials. Most people are familiar with the finely powdered graphite used as a lubricant, or the “lead” in pencils. Both of these products typically contain flake graphite. As the name implies flake graphite has a distinctly flaky or platy…
CV Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…