CV Brake Lining Hole Drilling Machine is used for drilling rivets holes of CV brake lining automatic.It realizes automatic feeding, automatic clamping, automatic indexing, automatic rotation, automatic drilling, automatic cutting, and automatic stacking. One worker can operate 3 to 4 machines. Technical Parameters： 1. Brake lining size range: Inner arc radius R142-R245, Width ≤ 225 2. Main Spindle Speed: 2800rpm 3. Gearshift Method: CVT 4….
Brake Pad Back Plates Flatting Machine is a hydraulic press machine to flatting the Brake Pads Back Plates, to ensure a qualified flatness. Technical Specifications: Height to the Opening Hole: 550mm Assembly Size: 600mm(left to right)x600mm(front to rear) Working Length: 350mm Motor/pump: 4KW (6 electrodes), 25L Height of the Working Table: 800mm Down-link Speed: 350mm/s…
This series features two primary configurations based on the number of cylinders: the 8 – cylinder type and the 4 – cylinder type. The design is painstakingly tailored to meet the diverse requirements of different brake pad sizes and the specific curing pressure needs determined by the formulation. This customization ensures that every brake pad,…
Brake Pads Automatic Material Weighting and Mixing System is used for weighing raw materials automatic before mixing.This system operates fully automatic base on the friction material formulation which is saved in PLC. If operator selects saved formulation, automatically weighing and collecting different weighed material and then discharge to the linked Mixer. Feature: -The whole process…
CV Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Brake Pad Backing Plates Glue Spraying Booth is assembled from several units including painting room, painting system, spray gun transmission device, tray transmission system, exhaust gas treatment system, etc. Main Configuration and Technical Parameters: Painting room size: 2600×1840×1910mm Chain center distance: 650mm Operating height: 800±50mm Glue supply method: Pneumatic agitator prevents glue from settling, peristaltic…
Car Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared…
Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive motor…
Brake Pads Friction Materials-Mineral Fiber|Mineral Wool Today, with the rapid development of human civilization, the natural environment has been greatly damaged, and environmental problems have become a serious issue that all mankind must face together. Energy conservation and emission reduction, and vigorous promotion of low-carbon, environmentally friendly and green buildings have become the focus of…