Motorcycle Brake Shoes Tensioning Machine is used for fixing the lining and brake shoe back plates. Technical Parameters： 1. Hoof working diameter range:170~340mm (customized according customer’s requirement) 2. Work pressure:1000kg/10000N 3. Size: 800*500*850mm 4. Weight: 500Kgs Click To See More Motorcycle Brake Shoes Machines
Car Brake Pads Automatic Packing Line is used for packing finished brake pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Brake Pad Back Plates Hook Drawing Machine is an machines to process the hooks on the brake pad back plates, to increase the shear force in Brake Pads. Technical Specifications: No. Item Parameters 1 Length Range of Back Plates ≤450mm 2 Applicable Back Plates Length 100-400mm 3 Applicable Back Plates Width 60-180mm 4 Applicable Back…
Brake Pad Backing Plates Punch Machine is a machine to puch the brake pad back plates for car Brake Pads and truck brake pads. Technical Specifications: Sliding Block Pressure: 3150KN Sliding Block Stroke: 250mm Stoke Numbers: 30 times/min (fixed);20-30 times/min (alterable) Die Height: 500mm Die Height Adjustment:120mm Dimension From Slider Center line to Machine:450mm Slider…
Brake Shoe Lining Side Chamferring Machine is used for processing both edge chamferring and grinding of CV Brake Linings on one side. Technical Parameters： Machine size:2380 x 1000 x 1100 mm Production Capacity:2800 – 3500 pcs / shift Chamferring size: Max. 50 mm. Click To See More Brake Shoes Machines
CV Brake Linings Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for Brake Pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil…
Brake Pads Friction Materials Titanates-Potassium Magnesium are widely used in the production of automotive ceramic brake pads, train Brake Shoes and clutch friction plates. GRANULARITY（SIEVE ANALYSIS，PARTICLE SIZE） Diameter(μm)：2-10μm D97(µm)：18-25μm APPEARANCE Shape： Flaky Particles Color： Ivory Yellowish White PHYSICAL PROPERTIES Specific gravity(g/cm3): 3.7±0.1 Bulk Density(g/cm3):0.6-1.1 Moisture Rate(%): ≤1.5% Melting point (℃): >1300℃ Hardness(Mohs): 4.0 PH 8.0-11.0 CHEMICAL COMPOSITION Composition TiO2 MgO K2O Others Rate（%w.t.）…
Brake Pad Dynamo-Meter Test Machine is used to process the brake performance test and NVH test on assembled brake by combining mechanical inertia and electrical inertia, it permits the replication of braking performance for a wide range of vehicle sizes. Inertia simulation allows for precise vehicle inertia points to be tested via the drive motor…
Vertical Brake Lining Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…