Showing all 18 results
Assembled Passenger Car Brake Shoe Outer Arc Grinder is used for grinding the assembled passenger car and light truck brake shoe after bonding together. Technical Parameters： 1. Emery wheel diameter: 240 mm 2. Emery wheel height: 50 – 80m 3. Radius of brake shoe assembly: 85 – 160 mm (customized according customer’s requirement) 4. Diameter of Dusting hole: 118mm
Automatic PC Brake Shoe Lining Grinding Line for processing the passenger car brake shoe lining inner arc grinding, outer arc grinding and side edge chamferring, and can add long lining cutting procedure accordingly (if brake shoe lining pressed into a long block). The production line adopts PLC programmable control system, and the action and process…
Brake Shoe Steel Shot Blasting Machine is used for surface cleaning of Brake Shoes steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will get…
Car Brake Shoe Lining Cutting Machine is used to cutting the Brake Linings into pieces according to parts sizes. Technical Parameters： Electric Power: 380V 50HZ Production Capacity: 15 Cycles/Minute, Speed Adjustable. Cutting Knifes: Diamond Cutting Knifes Fixtures: 45# Steel Electric Motor: Cutting Axle 5.5KW, Mold Axle 0.55KW. Processing Accuracy: -Cutting Width:≤0.10mm -Parallelism Between Cutting Axle…
Car Brake Shoe Lining Hot Press Machine is used for pressing forming PC and CV Brake Linings, and it is highly working conditions and efficiency. Technical Parameters： Model: BL-315T-SHP Punch Pressure: 315Tons Working Pressure: 25Mpa Slide Block Return Force: 1000KN Ejector Force: 1000KN Open Height: 1200mm Slide Block Max. Stroke: 800mm Ejection Stroke: 350mm Slide…
Car Brake Shoe Lining Inner Arc Grinding Machine for the internal radius of brake cutting linings, which can process an accurate size and qualified surface on the inner surface of cutting linings, to provide a good combination performance of the Brake Linings. Technical Parameters： Linings Process Range: Diameter＞60mm Feeding Speed: 1.7m/minute Main Axle Power: 3KW/2880…
Car Brake Shoe Lining Out Arc Grinding Machine is used for grinding the out arc surface of car Brake Shoes. The complete working station is protective covered. With door open and close protective device. Grinding Process: -Open the door -Put the linings on the mold -Close the door -Start the machine -Finish the grinding. -Take…
Car Brake Shoes Automatic Packing Line is used for packing finished Brake Pads, Brake Linings and all the finished or semi-finished products by film shrinking autonomic. Technical Parameters： – Voltage: 380V,50Hz,16A,3.5KW – Pressure: 5-7KG/CM2 – Pacing Speed: 0-20 bags/min – Machine Size (mm): L x W x H = 1670 × 766 × 1515 mm – Table Height: 780mm – Object Maximum Size: 500 × 400 × 150mm, W + H ≤ 470mm, H ≤ 150mm – Deliver Speed: 20m/min – Sealing…
Car Brake Shoes Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Car Brake Shoes Machines
Car Brake Shoes Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and brake shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Car Brake Shoes Friction Materials Mixer Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Car Brake Shoes Hot Curing Oven is used for Brake Pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Car Brake Shoes Lining Cutting Machine is a special equipment to cut brake shoe linings into small pieces to meet different dimension requirements. Specification： 1. Blade Diameter 150mm 2. Total: 13 blades 3. Diameter: R85-120mm 4. Motor power: 4KW 5. Adjustable lining cutting width Click To See More Car Brake Shoes Machines
Car Brake Shoes Outer Arc Grinding Machine is used for grinding the assembled passenger car and light truck brake shoe after bonding together. Technical Parameters： 1. Emery wheel diameter: 240 mm 2. Emery wheel height: 50 – 80m 3. Radius of brake shoe assembly: 85 – 160 mm (customized according customer’s requirement) 4. Diameter of Dusting hole: 118mm Click To See More Car Brake…
Car Brake Shoes Steel Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates will…
Car Brake Shoes Tensioning Machine is used for fixing the lining and brake shoe back plates. Technical Parameters： 1. Hoof working diameter range:170~340mm (customized according customer’s requirement) 2. Work pressure:1000kg/10000N 3. Size: 800*500*850mm 4. Weight: 500Kgs Click To See More Car Brake Shoes Machines
Passenger Car Brake Shoe Lining Inner Arc Grinder is used for grinding the inner surface of brake shoe lining. It applies rubber wheel to hold the Brake Linings and convoy them in and out. It uses emery grinding wheels to grind the surface with parallel grinding lines. Technical Parameters： 1. Size of Emery Grinding Wheels: φ140 X…
PC Brake Shoe Punching Machine is used for steel printing part number or words on the tendon plate. Specification: 1. Nominal force：80T 2. Table size:480x800mm 3. main motor power：7.5Kw 4. Press Surface Dimension:1850x1350mm 5. Press Height: 2740mm 6. Weight: 5000Kgs Click To See More Car Brake Shoes Machine