Showing all 16 results
Motorcycle Brake Pad Back Plates Shot Blasting Machine is used for surface cleaning of brake pad steel back plates, to present a natural steel appearance. It can remove the oxidized layer of the backing plates, and also optimizes the surface before gluing to improve the gluing quality. After shot blasting, the Brake Pads Backing Plates…
Motorcycle Brake Pad Factory Dust Collect Machine is used for cleaning the dust created during all the procedures, such as surface slotting, chamfering and grinding in the production. Technical Parameters： – Sack: Polyester needle felt – Racks: Galvanized – Pulse valve: 1.5″Right Angle – Dusk Valve: 300×300 – Turbine: 18.5KW – Voltage/Frequency: Customized Click To See More Motorcycle Brake Pad Machines
Motorcycle Brake Pad Friction Materials Mixer is used for mixing friction materials. It is widely applied in the production of Brake Pads, and Brake Shoes.It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, It…
Motorcycle Brake Pad Scorching Machine is used for friction surface high temperature scorching treatment, to carbonize the surface of OE quality Brake Pads. It consists with scorch oven and cooling with one line.It is continuous operation type and no delaying time. Brake pad moves on electrical heated plate without pressure. And also, scorching time and temperature…
Motorcycle Brake Pads Backing Plates Gluing Machine adopts glue spraying room, conveyor, touch screen control, pneumatic system. The steel backing plates are put on the customized spray adhesive tablets by workers, automatically sent to spray adhesive by conveyor, automatically put in the spray adhesive and then into the connected oven to dry and cool. Spray…
Motorcycle Brake Pads Compressed Air Machine is an equipment that supply the compressed air power for some machines and equipments for brake pads production. Technical Parameters: – Screw Group:4,5 Tooth Rotor – Compressing Format: Continuous,Single Stepped – Compressed Air Outlet Pressure:P2=0.8MPa – Cooling Mode:Air Cooling – Heating Platen Area: 550mmX450mm – Compressed Air Outlet Temperature:10℃～15℃ Higher Than The Environment Temperature – Lubricating Oil Quantity:About…
Motorcycle Brake Pads Disc Grinding Machine is to process the surface grinding of all kinds of brake pads, which doesn’t require fixtures to hold brake pads, brake pads are all fixed on the grinder disc by electromagnets. It can do fine grinding, coarse grinding and dust cleaning at the same time. It also equipped with step-less…
Motorcycle Brake Pads Electrostatic Powder Coating Line applies Infrared Heating Technology, which is 30-50% energy saving compared to electric heating technology with same electric power, the ordinary electric heating tunnel applies heat conduction to transfer the heat energy to brake pads, however, the infrared heating tunnel applies thermal radiation by special short and medium infrared…
Motorcycle Brake Pads Friction Materials Mix Machine applied the advanced technology of three-dimensional circulating mixing principle, are designed to mix friction materials automatically. It adopts new high-speed mixing blades and scientific mixing barrel, pneumatic feeding, to ensure that no dead angle in the chamber. It is equipped with cold water circulating cooling system, adapting to…
Motorcycle Brake Pads Friction Mixes Weighting Machine is used for weighing friction mixes automatic, the accuracy of weighing tolerance can be narrowed down to 0.1-0.5g/cup, adjustable on the PLC interface. Technical Parameters： – The weighing range: 0 – 250g / cavity for passenger car brake pads. – Weighing tolerance: 0.1-0.5g, adjustable. – Operation Mode: P.L.C. Controlled….
Motorcycle Brake Pads Hot Curing Oven is used for brake pads, Brake Linings and all the friction material curing procedure, to speed up the chemical reaction inside of the mixed friction materials to a reasonable and stable level. Technical Parameters: – Temperature operating range: Room temperature to 300℃ – Temperature equality degree: within ±4℃ (When the…
Motorcycle Brake Pads Hot Press Machines are the most popular type press machines used for making both passenger car and commercial vehicle brake pads, with its high production efficiency, and good production quality. One operator can handle 2 units such press machines, very efficient and labor saving. Technical Parameters： Model: BL-400T-HP Max Clamping Force:400Ton(4000KN) Heating…
Motorcycle Brake Pads Ink Jet Printing Machine is used for printing your information on the brake pads, such as item No., friction level or production day, only words. – Single-button start and shutdown – No need to clean the nozzle – Menu – driven way to edit – English and Chinese user interface – Touch screen with printer status indicator…
Motorcycle Brake Pad Printing Machine is used for printing company logo, words on the Brake Pads. Technical Parameters： – The printing color: Single Color – Dynamic type: Pneumatic – Ink cup diameter (inside and outside): 90mm – Max: plate size(mm): 100*250*10mm – Max: pin size(mm): 70*130 – Printed products are highly(mm): 1-200(300) – Before and after the trip: 175 – Printing speed/hr: 2300pcs/hr,…
Motorcycle Brake Pads Roller Gluing Machine for brake pad back plates, which includes three parts in this machine, which is widely used in brake pad factory, with a higher production efficiency, and good gluing performance. Technical Parameters： – ROLLER GLOWING MACHINE Adhesive Machine Infrared Heating Tunnel Fan Cooling Tunnel – ADHESIVE PART : Gluing Roller:…
Motorcycle Brake Pads Slot Machine is a special machine for processing slot and chamfer on disc brake pad. It is very easily adjustable and suitable for any model of passenger and commercial vehicle brake pads in the market, which can meet up with high-volume production needs. Technical Parameters： – Slotted motor: 4KW 2880 rev /…